Fusion 360 is actually a cloud-enabled design and collaborative platform that involves all the tools that are required when you go from the design to the fabrication. Th use of Fusion 360 is very easy. You can use it by following these instructions.
1- No need to be Panic:
First of all, if you are going to use the Fusion 360, you should not panic because there are many easy tricks in Fusion 360 by which you can correct mistakes. For example, if you don’t select the right thing, then you can simply wipe that selected thing by hitting x, instead of canceling it by hitting on escape or cancel.
2- Start Simple:
If you are using Fusion 360 you must know that immediate working on the larger projects in order to get your final products can be disappointing. You must start with simple projects and then slowly go from simple to complex projects to get your desired products.
3- Sketch Basics:
The common that you may make using Fusion 360 is how you create sketches. Hitting on the Stop sketch present at the end of the tool and then going to sketch- create sketch is the most common error that you may make while using the sketch tool.
By doing this your previous sketch will not appear after you lay another paper sheet on it. The same happens when you use Fusion 360 when you lay another sheet of paper it may look connected but actually, they are not connected. Whenever you stop a sketch in Fusion 360 you can come back to it by double-clicking on it.
4- Mysteries of the right-click:
While using the Fusion 360, you may commonly use the left click on your mouse because it mainly helps in performing a lot of functions. But you should know that you can also perform a lot of functions by using the right click of the mouse while using Fusion 360.